Spectrum Analyzer (Spectroradiometer)
Goniophotometer (light distribution curve tester)
LED flicker characteristic tester
Architectural lighting inspection
UV radiation detector
LED life and aging tester
Drive power and electronic ballast tester
Illuminance meter/Luminance meter/Photometer
Digital electrical parameter measuring instrument
Precision test power supply (AC/DC)
Electromagnetic compatibility (EMC) test system
Environmental safety testing equipment
Supporting test equipment
根据CIE和IEC标准对LED测试方法,专用于单体LED和组合型照明LED的电性能、光度性能、光束分布等特性参数的测量。仪器自带测试光栅和测试暗箱,满足任何环境下的测试要求。主要应用于单颗LED,LED反射灯、par灯等各种LED光源灯具的光电参数测量。可绕c轴、γ轴自动旋转。获得三维光强分布图。
测试界面
测试报告
>光度测量范围:0.1~30,000cd
>光度测量精度:一级
>角度测量范围:垂直轴-90°~+90° 水平轴0°~360°
>角度测量精度:±0.2°
>测量角度间隔选择: 0.5°/1°/1.5°
>自动绘制光强空间分布曲线(极坐标和直角坐标)
>自动测定光束角:常用的半强度角以及可以满足特殊要求的1/4光强度角和3/4光强度角和1/10光强度角
>被测灯具尺寸为Φ22~Φ180mm
>被测灯具与探头的测试距离为316mm/1000mm
>工作电源:
① 供电电压:AC 220V±10%
② 电源频率:50Hz/60Hz
③ 功耗:35VA
>工作环境要求:
① 允许工作环境温度:0℃~40℃
② 正常测量最佳温度:25℃±5℃
③ 相对湿度:≤65%R.H
被测灯具尺寸为Φ22~Φ180mm
被测灯具与探头的测试距离为316mm/1000mm
GB/T 9467-2008, “室内灯具光度测试”
GB/T 9468-1988, “道路照明灯具光度测试”
GB/T 7002-2008,“投光照明灯具光度测试”
LB/T 001-2008 “整体式LED路灯的测量方法”
GB/T 24824-2009 “普通照明用LED模块测量方法”
CIE Pub. NO.70, “The Measurment of Absolute Luminous Intensity Distributions”
CIE DIV.Ⅱ-TC10, “Photometry of Luminaires”
CIE Pub.NO.76, “Photometry-the CIE Sytstem of Physical Photometry”
CIE 121-1996 “The Photometry of Goniophotometer of Luminaries”
IESNA LM-75 “Goniophotometer Types and Photometric Coordinates”
IESNA LM-79 “Electrical and Photometric Measurements of Solid-state Lighting Products”
IESNA-1971(73-96),“IES Practical Guide to Photometry”
IESNA 61341 “Method of Measurement of Center Beam Intensity and Beam Angle(s) of Reflector Lamp”
...
适用于单颗LED、COB、小型筒灯、射灯、Par灯
电话
13777457192邮箱
sales@inventfine.cn地址
杭州市余杭区临港路11号扫码关注创惠