WT5080 LED power driver meets the national and international standard of GB 24825-2009 and IEC62384: 2006 for LED lamp electric performance test requirements. With advantages of high intelligence, convenient use, good stability and high accuracy , it is a new generation of intelligent instrument.

> Input characteristic test (AC )

  a) Measurement of input voltage, current, power, power factor, frequency, total harmonic 0 - 50 times of each harmonic 

     component, initial phase angle, the peak phase angle, closing phase angle

  b) Voltage, current, fundamental wave frequency range: 45Hz - 65Hz

      Narrow frequency  range: 45Hz~5KHz

      Wide frequency range: 45Hz~1MHz

  c) Voltage range: 1V~300V ( CF = 1.67 )

     Current range: 5mA~2.7A ( CF = 3 )

     Power range: 0.15W~800W

     Power factor range: 0.000~±1.000

> The input characteristic test ( DC ) 

  a) Measurement of input voltage, current, power

  b) Voltage range: 1V~500V

     Current range: 5mA~8A

     Power range: 0.15W~4000W

> The output starting characteristic test ( DC )

  a) Measure lamp voltage, current and power factor

  b) Voltage range: 1~300V(CF=3)

     Current range: 5mA~2.7A（CF=3)

     Power range: 0.015~800W

> Output characteristic test (DC) 

  a) Measure lamp voltage, current, power, ripple current

  b) Voltage range: 3~500V

     Current range: 5mA~8A

     Power range: 0.015~4000W

     Ripple current range: 5mA~2.5A

> Output startup characteristic test(DC)

  a) Measure lamp voltage, lamp current changing curve in 0 to 2 seconds and data

  b) Voltage range: 3V~500V

  c) Current range: 5mA~8A