WT2000 (HID) meets the national and international electrical capacity standards towards electrical ballast of IEC 60929, IEC 60969, IEC 61000-3-2, GB/T 15144-2009, GB/T 17263-2002, etc. Eight windows display each parameter of input and output characteristics. The reading is direct and is easy to compare and analysis.
Measurement parameters
Test voltage, current, power, power factor, power line frequency, total harmonic as well as 0~50 time harmonic separate amount
> Input characteristic test
a) Test voltage, current, power, power factor, power line frequency, total harmonic as well as 0~50 time harmonic separate amount
b) Range of voltage and current basic wave frequency:45Hz－65Hz
Range of narrow frequency: 45Hz－5kHz
Range of wide frequency: 45Hz－1MHz
c) Range of voltage: 10.0－300.0V (virtual value)
d) Range of current: 0.040－10.00A (virtual value)
e) Range of power: 0－2200W
Range of power factor: 0.000－1.000
> Output stable test
a) Test lamp voltage, current, power, wave crest coefficient and surge frequency
b) Range of lamp voltage: 10.0－300.0V
c) Range of lamp current: 0.300－10.800A
d) Range of lamp power: 10.0－1000W
> Output startup test
Test input voltage, current, power and output lamp voltage, lamp current, lamp power’s changing curve and data within 0 to 10 minute
